Видео

A gushing leak at the invert of a 10" HDPE pipe that was repaired using Prime Flex 920, our single-part polyurethane resin. This was one of many failures on this particular project due to a sudden mid-project change in geotechnical conditions in the area. The worst of these chambers required two 2" submersible pumps, each with a capacity of 62 Gallons per minute working together to keep up with...

The DPM30 penetrometer allows exclusively continuous dynamic penetrometric tests to be performed. For the dynamic tests, the penetrometer is equipped with a 66 pound (30 kg) hammer with a 7.87 inch (200 mm) stroke, operated by a hydraulic motor. It is driven by a motor-pump unit, where the motor can be either electric (220v or 110v) or a petrol engine. A hydraulic extractor is used to extract r...

Repairing a seawall, sealing leaks and permeating the soils behind it with polyurethane foam (Prime Flex 920).

Learn how to seal leaks in concrete with injection of Prime Flex 900 XLV. This product is a thin, hydrophilic polyurethane resin that reacts with water and expands to form a closed cell, watertight foam. It is typically injected under pressure to seal actively leaking joints and cracks in concrete structures, including hairline cracks. This product is independently tested and certified to meet ...

PR10 ACLM is a super low viscosity acrylamide grout that yields a gel upon reaction. Available as granules or liquid, the grout solution is as thin as water, allowing PR10 to follow infiltrating water for sealing leaks or to deeply penetrate soils for soil stabilization. The gel time is adjustable from a few seconds to several hours. The cured grout provides an economical water barrier or soil ...

Prime Resins’ Conduit Seal is a quick and convenient method of stopping water seepage around pipe penetrations or around cable in conduit. It comes in a kit and is easy to use. Contents of Kit - 8 pair of vinyl gloves - 1 liter Prime Flex Hydro Gel SX™ in a measuring bottle - 8 bags of Oakum (12” in each bag) - One 2-gallon plastic bucket (for water) - Two insertion sticks

Prime Cem Renew is a fiber-reinforced concrete resurfacer from Prime Resins. Primary applications include driveways, sidewalks, pool decks, garage floors, elevated slabs and vertical concrete surfaces.

Creating a sample of SoiLok, a grout for soil binding and stabilization.

Mixing a SoiLok sample in the lab

Installing TAM pipes for injections.

Injecting soil with SoiLok for soil binding.

Lifting concrete slabs with Precision Lift® polyurethane foam.

Deep Soil Injection

Soil stabilization with polyurethane grouts.

Patriot Pump

Pipe repair with jetter for clean resin.

Manhole leak repair with Quick Mix cartridges

Bulkhead repair

Activated oakum demonstration

Mixing a sample of Prime Flex 920

Seawall repairs: void fill and stabilization with Prime Flex 920 polyurethane grout.

Sealing gushing leaks around a spillway

Gushing Leak Demonstration

Mixing a sample of Prime Flex 900 XLV

Precision Lift concrete slab lifting and leveling

Residential repairs using chemical grouts from Prime Resins

Stopping inflow & infiltration with Prime Flex 920

Prime Resins epoxies used to structurally seal spillway joint

Using SoiLok for underground waste containment and/or excavation